 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
PARTS |
||
as
of 9/22/04, prices are still subject to change without notice |
||
| PART / DESCRIPTION | PRICE | PHOTO |
| AXLE
LOCKING COLLAR Aluminum, specify single. or double clamp |
$ 7.00 USD | |
| AXLE Complete swept front; included spindles, bearings, bolts and adjusters |
$200.00 USD | |
| AXLE,
Front Please specify dirt or wide/ zero (rt. side camber adjustable-std) |
$110.00 USD | |
| BEARING Rear axle, 1-1/4” ID |
$ 7.00 USD | |
| BELLY
PAN Aluminum .050” thick |
$ 50.00 USD | |
| BRAKE
CALIPER Specify single or dual piston, with pads |
$ 88.50 USD | |
| BRAKE
HUB 1-1/4” aluminum |
$ 25.00 USD | |
| BRAKE
PADS Set- specify for steel or aluminum |
$ 22.00 USD | |
BRAKE
ROTOR |
$ 35.00 USD | |
| BRAKE
SYSTEM w/o line |
$133.00 USD | |
| BUMPER Front |
$ 40.00 USD | |
| BUMPER Rear |
$ 55.00 each USD | |
| BUTTON Turn fastener, 7/16” dia.- reach, steel |
$ 2.00 USD | |
| CARRIER
(NO BEARING) Rear, billet alum. (specify rt. or left) steel |
$ 85.00 / $ 65.00 USD | |
| CARRIER
W/BEARINGS Rear, billet alum. (specify rt .or left) steel |
$ 95.00 / $ 75.00 USD | |
| CARRIERS
(NO BEARINGS) Rear- set, billet alum. steel |
$165.00 / $125.00 USD | |
CARRIERS
W/BEARINGS |
$185.00 / $145.00 USD | |
| COMPLETE
BODY (excludes belly pan & firewall) |
$275.00 USD | |
| FIREWALL |
$ 20.00 USD | |
| GAS
TANK VALVE 1/8” pipe thread, red handle |
$ 9.00 USD | |
| GAS
TANK 9” aluminum / 11” aluminum |
$ 65.00 / $ 75.00 USD | |
| GEAR
HUB 1”; rear axle, quick change |
$ 65.00 USD | |
| GEAR
HUB LOCKING COLLAR 1-1/4” w. keyway |
$ 8.00 USD | |
| HONDA Exhaust flange, slip on |
$ 10.00 USD | |
| HONDA Exhaust system, 2 piece w/ flange, side exit, w/o muffler - w/ muffler |
$ 50.00 - $ 55.00 USD | |
| HOOD Fiberglass gel coat (2003 & earlier) |
$ 65.00 USD | |
| HUB 1” keyed rear wheel |
$ 18.00 USD | |
| HUB Front w/ 5/8” bearings |
$ 20.00 USD | |
| MASTER
CYLINDER |
$ 37.50 USD | |
| MOTORPLATE aluminum, lightened solid |
$ 25.00 / $ 20.00 USD | |
| NERF
BAR Left side, additional safety bar add $10.00 |
$ 75.00 USD | |
| NERF
BAR Right side |
$ 65.00 USD | |
| PEDAL Billet aluminum, gas and brake are the same |
$ 18.00 USD | |
| PLATES Turn fastener |
$ 0.65 USD | |
| RADIUS
ROD SPACERS |
$ 4.00 USD | |
| RADIUS
ROD W/ROD ENDS 5/8” OD rod w/3/8” shank, 5/16” hole ends |
$ 24.50 USD | |
| RADIUS
ROD W/ROD ENDS Std. 5/16” shank and hole ends |
$ 15.50 USD | |
| RADIUS
ROD 5/8” OD up to 20” long |
$ 10.50 USD | |
| RADIUS
RODS W/ROD ENDS Complete car |
$192.00 USD |
|
| RADIUS
RODS OD up to 18” long |
$ 6.50 USD | |
| REAR
AXLE SPACERS 1-1/4” ID |
$ 2.00 USD | |
| REAR
AXLE 1-1/4” 7075 aluminum, 34-36” long |
$ 82.50 USD | |
| ROD
END Std. 5/16” shank and bolt hole |
$ 3.00 USD | |
| ROD
END 3/8” shank X 5/16” bolt hole |
$ 4.50 USD | |
| SEATBELT
& SHOULDER HARNESS 4 point, shoulder pull down, seatbelt up |
$ 65.00 USD | |
| SHOCKS Trimble Motorsports, standard 3” stroke PSI (air or nitrogen) |
$ 75.00 / $110.00 USD | |
| SNAP
RINGS 1-1/4” axle |
$ 1.10 USD | |
| SPINDLE
BEARING 3/8” ID |
$ 7.00 USD | |
| SPINDLE
BOLT Specify 2-1/2” or 3” brackets |
$ 3.50 USD | |
| SPINDLE
SPACER |
$ 0.80 USD | |
| SPINDLE Specify 2-1/2’’ or 3”; dirt or zero scrub, 10 degree- std. |
$ 30.00 USD | |
| SPRING
FASTENER Turn |
$ 0.90 USD | |
| SPRING Coil over, 1-7/8” OD, specify weight |
$ 25.00 USD | |
| STEERING
BUSHING Black nylon |
$ 9.00 USD | |
| STEERING
HUB Steel / Aluminum quick change- removable |
$ 5.00 / $ 35.00 USD | |
| STEERING
ROD Specify left or right, dirt or zero |
$ 6.50 USD | |
| STEERING
SHAFT 5/8” lightened |
$ 40.00 USD | |
| STEERING
WHEEL Round, soft rubber |
$ 48.00 USD | |
| STEERING
WHEEL PAD Snap on |
$ 16.00 USD | |
| STICKERS Roll cage, specify color |
$ 4.00 USD | |
| TAIL Fiberglass, gel coated |
$ 60.00 USD | |
| TITANIUM
AXLE |
$600.00 USD | |
| UPHOLSTERY
SET Less horn button, 4 pieces |
$150.00 USD | |
Ashley Enterprises-Westside, Inc. • 22 W. Main • P.O. Box 398 • Casey, Illinois 62420 • 217-932-2315
All Rights Reserved, Ashley Chassis 2009